Espressif Systems · Wi-Fi microcontroller · 2014

ESP8266EX

A 32-bit processor and a complete 2.4 GHz Wi-Fi radio in a 5 mm package.

Not recommended for new designs. Espressif suggests the ESP8684 instead.

Processor
Tensilica L106
Max clock
160 MHz
Wireless
Wi-Fi b/g/n
GPIO
17 pins
Supply
2.5–3.6 V
Package
QFN-32
3D viewLoading 3D model…
Layers

Pinout

Seen from above. Select a pin to see what it does.

ESP8266EX

QFN-32 · 5 × 5 mm · 0.5 mm pitch · the dot marks pin 1

Specifications

Core and memory

Architecture
Tensilica L106, 32-bit
Cores
1
Max clock
160 MHz
RAM for your code
Under 50 kB
On-chip flash
None
External flash
Up to 16 MB, SPI

Wireless

Wi-Fi
Wi-Fi 802.11 b/g/n
Band
2.4 GHz
Transmit power
Up to +20 dBm
Modes
Station, access point
Security
WPA, WPA2

Power

Supply
2.5–3.6 V
Running
80 mA average
Modem sleep
15 mA
Light sleep
0.9 mA
Deep sleep
20 µA
Temperature
−40 to +125 °C

Peripherals

GPIO
17
ADC
1 input, 10-bit
UART
2 (one transmit-only)
SPI
2 (one shares the flash pins)
I2C
1, in software
PWM
4 outputs
I2S
1 input, 1 output

What to build

Projects that play to this chip's strengths.

Beginner

Wi-Fi temperature sensor

Read a sensor, send the value over Wi-Fi, then drop into deep sleep so a battery lasts.

Wi-FiDeep sleepGPIO
Intermediate

Phone-controlled switch

Drive a relay from a GPIO pin and switch it from a phone on the same network.

Wi-FiGPIO
Advanced

Addressable LED controller

Use the I2S output to drive a strip of WS2812 LEDs, with patterns chosen over Wi-Fi.

I2SWi-Fi

Boards with this chip

A bare chip needs supporting parts around it. These boards include them.

  • ESP-01The smallest module: chip, flash and antenna, with two spare IO pins.
  • ESP-12FChip, 4 MB flash and antenna under a metal shield, for soldering onto your own board.
  • NodeMCU DevKitAn ESP-12 module with USB and a voltage regulator on a breadboard-friendly board.
  • LOLIN D1 miniA compact USB board with stackable add-on shields.